Is your dishwasher not as clean as it should be? It’s not uncommon for dishwashers to accumulate dirt and grime over time, but the good news is that you can do something about it! In this article, we’ll show you 10 easy ways to get your dirty dishwasher sparkling clean. And don’t forget to check out Limpiar’s professional cleaning services at the end of the article – they’re the experts when it comes to getting your dishwasher – and your whole kitchen – looking its best!
1. Remove all dishes and racks.
Before you start cleaning your dishwasher, make sure to remove all dishes and racks. This will make it easier to access all the nooks and crannies that need to be cleaned.
2. Check the filter.
The filter in your dishwasher is responsible for keeping food particles out of the machine, so it’s important to keep it clean. If it’s clogged, your dishwasher won’t be able to do its job properly. To clean the filter, simply remove it from the dishwasher and rinse it under running water. Be sure to dry it thoroughly before putting it back in the dishwasher.
3. Wipe down the interior.
Use a damp cloth or sponge to wipe down the interior of your dishwasher, including the walls, door, and racks. Be sure to get into all the nooks and crannies where dirt and grime can build up.
4. Clean the spray arms.
The spray arms are responsible for spraying water and detergent onto your dishes, so they need to be kept clean. To clean them, remove them from the dishwasher and soak them in a mixture of water and vinegar for 30 minutes. You can also use a toothbrush to scrub off any stubborn buildup. Once they’re clean, rinse them thoroughly and put them back in the dishwasher.
5. Clean the door gasket.
The door gasket is the rubber seal that goes around the door of your dishwasher. Over time, it can accumulate dirt and food particles, which can lead to a less effective seal. To clean it, simply wipe it down with a damp cloth or sponge. You can also use a toothbrush to scrub it clean. Make sure to dry it thoroughly before closing the dishwasher door.
6. Run a vinegar cycle.
Once you’ve cleaned all the individual parts of your dishwasher, it’s time to run a vinegar cycle. This will help to remove any lingering odours and dissolve any hard water buildup. Simply pour a cup of vinegar into the bottom of the dishwasher and run a normal cycle.
7. Dry thoroughly.
After the vinegar cycle has finished, it’s important to dry your dishwasher thoroughly. Leaving it damp can lead to mould and mildew growth. Simply open the door and leave it open for a few hours to air dry. Alternatively, you can use a towel to wipe down the interior.
8. Deodorise.
Once your dishwasher is clean and dry, it’s time to deodorise it. This will help to get rid of any lingering odours and make your dishes smell fresh and clean. To do this, simply sprinkle some baking soda on the bottom of the dishwasher and run a normal cycle.
9. Wipe down the exterior.
Now that the inside of your dishwasher is clean and fresh, it’s time to clean the outside. Start by wiping down the exterior with a damp cloth. Be sure to pay special attention to the control panel and handle, as these areas can often get overlooked. If there are any stubborn stains, you can use a mild dish soap to clean them.
10. Maintain your dishwasher.
To keep your dishwasher running smoothly, it’s important to maintain it regularly. Be sure to empty the food trap after each use and run a cleaning cycle once a month. You should also check the hoses and connections for leaks or damage.
With these simple steps, you can keep your dishwasher clean and running smoothly for years to come. But what about when you need a little extra help? That’s where Limpiar comes in. We offer professional cleaning services that can take care of all your dishwasher needs, big or small. From deep cleaning to maintenance, we’ve got you covered.
To learn more about our services or to schedule a cleaning, visit our website or give us a call today. We look forward to helping you keep your dishwasher – and your whole kitchen – sparkling clean!
Leave a Comment